LUBRICATING PRODUCTS
GEAR SHIELD NCW
The Open Gear Lubricant of Choice for mills and kilns.
High viscosity residual open gear lubricant for mills and kilns applied via intermittent spray for use in ambient temperatures below 0°C.
Gear Shield is internationally recognized and installed on open gears throughout the world.
GEAR SHIELD NC
The Open Gear Lubricant of Choice for mills and kilns.
High viscosity residual open gear lubricant for mills and kilns applied via intermittent spray for use in ambient temperatures of 0°C and above.
Gear Shield is internationally recognized and installed on open gears throughout the world.
GEAR RUN-IN
For open gear drive application, improving the contact pattern on gear and pinion drives.
Open gear lubricating oil blended with chemical additives designed to remove asperities on open gear tooth surfaces.
OPEN GEAR CLEANER
Designed to be applied through the automatic lubrication system in place of the open gear lubricant while the gearing is running and under load, greatly reducing down time
Cleaning and softening agent for open gear lubricants designed to soften and clean contaminant build up in gear tooth roots.
DISTRIBUTOR VALVE - (Part no. GPDV-6)
6-Outlet distributor valve without switch for lubricating spray systems
GPNP PNEUMATIC PUMP 50:1
Specifically designed for the pumping of high viscosity Open Gear Lubricant (OGL) with a chemical compound that cannot normally be pumped with standard competing pumps over an extended time and over long distances during extreme temperatures.
The GPNP Pneumatic OGL Pumps is delivered completely assembled, easy to install on air and lubrication lines / feeds and include muffler, air inlet filter and all fittings necessary for installation on 180Kg drum.
Power Industry
Our products enhance reliability & up-time of equipment
Mining and Cement Industries
We are supplying high performance lubricants designed to perform in these demanding environments